Ten Tips To Get You Through Your Kitchen Remodel

Many people want a new kitchen, but few people realize the effort and hassle that goes into a redesign of the kitchen. It can take months for a major remodel and you won’t have access to the room while the work is on. While this can be an arduous time, it will well be worth it once you have your beautiful new kitchen in place.Here are a few tips for getting you through the remodel and going into your new kitchen:

1. In another part of the house you will need to install a temporary kitchen. Make sure that this is a convenient location with access to water and a space to keep food cold as well as a place to heat up meals. Often portable appliances such as a crock-pot or electric frying pan and a tiny dorm refrigerator and microwave fit well for a temporary arrangement if you are going to replace your old devices.Do you want to learn more? Visit kitchen remodel.

  1. Make sure that you think about how long the work will take. Most of the work which for longer than anticipated. That can be frustrating for everyone, so setting a realistic date is in your best interest and you won’t be disappointed that way.
  2. Make sure you know what you will be using again. Whether you’re doing some of the job yourself or contracting it out, make sure the things that are going to be reused are very simple. During a remodeling, the cabinets, counter tops, and flooring can get damaged and if you plan to reuse them this can be a huge problem and expense. Remember to be vigilant about those recycled products.
  3. Make sure the room is sealed properly so you don’t get dust and debris throughout the house. If you’ve hired someone to do the job, they’ll probably know what to do, but if you do it yourself, invest in some plastic sheeting and make sure you keep it as good as possible around the doors.
  4. Get everything out of your kitchen; box up all that is not going to be used in your temporary kitchen. Label and keep the boxes out of the way.
  5. Take anything not hammered or screwed down. This includes drawers, spice racks, wall clocks, decorations and so on. Place a protective cover over anything that should stay in place while you’re working.
  6. Make arrangements to remove any refuse which may accumulate during the remodeling process. If you’re going to have to rent a dumpster, do it in plenty of time or have a pick-up truck on hand to carry the dump. If you are planning to rescue the old cabinet for a workshop or donation to a charitable cause, have a place ready for them to go as you remove it from your work area.
  7. Think safety and remember to turn off all utilities, turn off all utilities before removing any major appliances. This can be done at the individual gas and water shut-off valves. If there are no shut-off switches, the central valve must be turned off. In fact, the primary gas valve is placed near the gas meter. Remember, once you turn off the gas to the entire house, ALL pilot lights will need to be relit before they’ll be working again. If you are ready to clean up after a hard day’s work without careful planning you can find yourself without hot water.
  8. The wiring may have been modified in older homes over the years, and it may not be clear which circuits or fuses control specific areas. If you are confused, turn off the main power or get professional help. Never take energy for a gamble! Additionally, tape over the breakers so they won’t inadvertently be turned on. If you plan to upgrade your electrical system and add new outlets and attachments, all existing outlets and fixtures will need to be dismantled.
  9. 10. Disable both spotlights. Then, by using a screwdriver, dismantle each fixture to unscrew the plate and the receptacle and pull out the receptacle. For interim, put wire nuts on any exposed wires. The raw copper wire is the base and need not be clamped.